Track Adjustment
Grease is under high pressure.
Grease coming out of the relief valve
under pressure can penetrate the body
causing injury or death.
Do not watch the relief valve to see if
grease is escaping. Watch the track or
track adjustment cylinder to see if the
track is being loosened.
1 Move the machine a distance of two
times its length. Bring the machine to a
slow stop. Shut off engine.
2 Remove the cover for the track adjust-
ing mechanism.
3 Add grease with a grease gun to move
the idler forward until the track is fully
tight.
4 Use a straight edge against face and
make a mark on the rod with a pencil or
marking pen even with face.
5 Mark the rod .4" (10 mm) toward the
idler from the first mark. Open the
relief valve and let the idler move back
until the second mark is behind face
(A). Close the relief valve.
The resulting reference sag should be
about 2" (50 mm) on these models.
433
Hydrostatic Loaders
TRACK ADJUSTMENT
A