Shoe Width For
Track-type Machines
Track shoe width and degree of impact
(bumpiness) can affect the wear life of the
undercarriage. Since shoe width is a con-
trollable variable, you can improve perfor-
mance and wear life of the components by
choosing the right shoe.
Use the chart on page 54 to help choose
the right shoe for a customer based on the
following factors.
Factors Affecting
Machine Production
Flotation
Choose shoe width to provide adequate
flotation, but not more than is needed. The
narrowest shoe which provides adequate
flotation will prevent the machine from
digging in or sinking into underfoot mate-
rial. Flotation increases proportionally to
shoe width.
Penetraction-Traction
Additional shoe width does not provide
greater penetration or traction and conse-
quently does not increase production assum-
ing adequate flotation.
Maneuverability
Additional shoe width increases turning
resistance, making the machine harder to
handle and decreases productivity.
Versatility
Increased shoe width improves machine
versatility allowing it to change from “hard”
to “softer” underfoot conditions without los-
ing flotation. However, increased shoe width
accelerates wear and structural damage.
Undercarriage System Wear
and Structural Life Factors
Shoe Wear Life
Wider shoes do not improve wear life. The
extra wear material provided by wider
grousers gives a little extra life. The largest
variable affecting shoe wear life is slippage.
Shoe Structural Life
Bending stress on the shoe increases pro-
portionately to the distance from the outer
edge of the link to the end of the shoe.
Cracking, bending and hardware loosening
increases as shoe width increases.
Basic Rule of Thumb: Always specify the
narrowest shoe possible that will provide
adequate flotation and traction without
excessive track slippage. See chart on fol-
lowing page.
Link-Roller-Idler Wear Life
Wear rates increase on link rail sides,
rollers and idler flanges as shoe width
increases because of increased load inter-
ference. Increased shoe width can also
aggravate link cracking.
Pin and Bushing Wear Life
External bushing wear rate on Sealed and
Sealed and Lubricated Track and internal
wear rate on Sealed Track increases as
shoe width increases in a given underfoot
condition. This is due to the increased
loads, weight and twisting.
Pin and Bushing Structural Life
Too wide shoes in high impact or steep
terrain can cause pins and bushings to
loosen in the link bores. This becomes
more evident with high single grouser
shoes. Loss of pin and bushing retention
prevents successful turn and replacement
maintenance.
12
SHOE WIDTH
General Information