Sprocket Bolt Torques — Use the torque-
turn tightening method on page 70.
Sprocket Bolt Torque Specifications
Bolt Additional
Model Size Torque Turn
D4H 5/8" 130 ± 30 ft. lb. +1/3 turn
D5M, D5N 175 ± 40 Nm
D5H
D6M, D6N
D6R
561M, 561N
527
D7H, D7R 3/4" 220 ± 40 ft. lb. +1/3 turn
D8L, D8N, D8R 300 ± 50 Nm
572R
578
583R
D9 7/8" 650 ± 50 ft. lb. +1/3 turn
589 870 ± 70 Nm
D9N, D9R 7/8" 480 ± 50 ft. lb. +1/3 turn
650 ± 70 Nm
D10, D10N, 1" 650 ± 50 ft. lb. +1/3 turn
D10R 870 ± 70 Nm
D11N, D11R
D11N, D11R 1 1/8" 650 ± 50 ft. lb. +1/3 turn
870 ± 70 Nm
Guides
Inspection — D8 through D11 machines do
not use front and rear guiding or roller
(rock) guards because of the oscillating
suspension system. Instead, “L”-shaped
“guides” are used to aid track guiding.
These guides attach in pairs to major bogies
with two bolts. No measurable service lim-
its have been developed for guides. They
should be inspected for wear and hardware
retention. D4 through D7 machines use
conventional front and rear guiding guards.
Wear strips should be inspected regularly
and replaced as required.
105
COMPONENTS
Elevated Sprocket Machines