
2600202
2600220
3-377
Engine Tools
3600 Engine Tools
4C-8769 Valve Seat Driver
Model: 3600 Engines
Warranty: Six Months
• Usedtoinstallwater-cooledvalveseatinserts
• Servesasguideanddriver,helpingtopreventinsertdamageduringinstallation
and ensuring insert is uniformly installed in cylinder head
• Overalllength:355.0mm(14.0in)
• Diameter of knurl handle: 65.0 mm (2.5 in )
Part Number Description
4C-8769 ValveSeatDriver
200-5958 Wear Sleeve Installer, 1U-6241 Seal Installer
121-7705 Stud Assembly, 121-7700 Distorter Block
Model: 3600 Engines
Warranty: Six Months
• Usedtoremoveandinstallcrankshaftwearsleeve—essentialtocorrectly
removeandinstallsleevewithoutdamagetosleeveorcrankshaft
• 1U-6241installssealafterwearsleeveisinstalled
Removal
• Use the 121-7700 Distorter Block with 5P-7409 Distorter
• Distorterblockboltsdirectlytoenginehousingusingoneofthecovermounting
holes and bolt
• Toolsworktogethertomakeanindentationinthesleeve(helpstoloosensleeve
from crankshaft)
• Distortertoolisrotatedbetweendistorterblockandwearsleevetocreate
an indentation in the metal (similar to using a hammer and chisel to make the
indentation)
• Makingfourindentationsaroundthecrankshaftwearsleeveshouldallow
sleevetoeasilyslideoffcrankshaft
Installation
1. Installwearsleeveininstaller.
2. Thread four studs into crankshaft.
3. Installsleeveandinstallerontostuds.
4. Install washers and nuts.
5. Tightennutstopullwearsleeveontocrankshaft.
6. Wheninsidefaceofinstallerbottomsagainstendofcrankshaft,sleeveis
installed to correct depth.
7. Install seal.
Reference
SENR3594,ServiceManualModule,DisassemblyandAssembly
Item Part Number Description Size
1 121-7705 Stud Assembly Threads on large end: 11/8 - 12, Threads on
small end: 1/2 - 13
2 1F-7958 Full Nut (1/2 - 13) (fork mounting hardware) 1/2-13
3 5P-8245 Hard Washer --
4 200-5958 WearSleeveInstaller --
5 5P-7409 SleeveDistorter --
6 121-7700 Distorter Block --
7 1U-6241 Seal Installer --