
2599344
2599368
2599389
3-350
Engine Tools
Camshaft and Timing Gear Tools
4C-5613 Puller Group (Continued)
Model: 3406
Warranty: Six Months
• Has wide puller jaws that distribute
load across more surface area on
gearandpreventdamagetosplined
teeth;conventionalpullerjawswill
not properly grab under gear hub
due to clearance problems, so they
are used to grab in spline tooth area
where they may damage gear teeth
• Can be used for general purpose
pulling operations
• 3-leg,10-tonpullerwithwide,at
puller jaws
Item Part Number Description
-- 4C-5613 Puller Group
1 4C-5628 Crossarm
Body
2 4C-5626 Forcing
Screw
3 4C-5625 Puller Jaw
4 4C-5624 Spring Clip
5 4C-5627 Tip
132-5451 Air Compressor Gear Holder
Model: 3406E, C-10, and C-12 Engines
Warranty: Six Months
• Used to keep air compressor shaft
fromturningwhileremovingor
tighteningdrivegearretainingnut
• Holdermakesremovingandinstall-
ing nut much simpler and faster —
also reduces possibility of damage
duringoverhaulprocedure
• Useshopvisetoholdaircompres-
sor assembly
• ServicePart:6B-6683Nut
Inside diameter 127 mm (5.0 in)
Height including
pins
88.9 mm (3.50 in)
Pin diameter 12.7 mm (0.50 in)
Retainingnutnal
torque
462 ± 54 N·m (340 ±
40 ft-lb)
Part Number Description
132-5451 Air Compressor
Gear Holder
4C-9991 Idler Shaft Retrot Tool Group
Model: 3500
Warranty: Six Months
• Usedtoretrotidlergearshafton3500Veeengines
• Easily and accurately aligns drill and tap for drilling and tapping bolt holes from
1/2 - 13 to 5/8 - 11 thread
• Eliminates replacing cylinder block
• Used with 1P-3048 Wrench Assembly and 1U-9218 Drill, 12.7 mm ( 1/2 in)
Reference
SEBF8166, Guideline for Reusable Parts
Item Part Number Description Size
-- 4C-9991 IdlerShaftRetrot
Tool Group
--
1 9U-5033 Core Drill 17/32in,4-uted
2 9U-5034 Bottoming Tap -5/8 in - 11 thd
-- 1A-5822 Bolt (not part of 4C-
9991 Tool Group)
1/2 in to 13 x 2 3/4 in
(Continued)