
2597224
2969120
2597255
3-291
Engine Tools
Fuel System Repair and Adjust
Injector Installation and Removal Tooling (Continued)
Essential Tool
Model: 3126B, C7, C9 Engines
Warranty: Six Months
Item Part Number Description Used with Used To Used On
Injector Installation and Removal Tooling
1 152-1057 Injector Installation Tool -- Install injectors 3126B
2 191-6077 Bracket 152-1057 Injector Instal-
lation Tool (replaces
standard bracket as-
sembly)
Install injectors C9
3 272-1149 Leg (2 pieces) 152-1057 Injector Instal-
lation Tool (replaces
standard legs)
Install injectors C7, C9 (after 06/2004)
4 274-9198 Rod (2 required) 152-1057 Injector Instal-
lation Tool
Removeinjectors C7, C9 (after 06/2004)
367-3070 Injector Installation and Removal Tooling
Model Usage: C7, C9 Engines
Warranty: Six Months
• Usedtosafelyremoveandinstallinjector
• Threaded tabs captured between injector clamp and head, allowing threaded
rod to be turned with 4 mm hex wrench to jack out injector clamp
• Threaded rods can be installed into head thread end down and injectors can be
pulled into head with M8 nuts
• M8 nuts supplied
• Lubricant suggested on threaded rods to reduce friction
Specications
Part Name Description
Threaded Rods M8 x 1.25
Hex Wrench 4 mm
Part Number Description
367-3070 InjectorInstallationandRemovalTooling
6V-4808 Tip Tester Adapter Group
Discontinued — Service Parts Available
Item Description
1 Nut
2 Body
Item Part Number Description
3 6V-1250 Seal
4 6F-0722 Seal
-- 6V-4808 Tip Tester
Adapter
Group