
Illustration 2 g00955964
The "type 2" pin that is in the unlocked position (1) and the locked position (2) .
1. Put the fork tines in the Unlocked position. Space the fork tines as far as possible from each other.
2. Put the fork tines in the Locked position.
3. Slowly, move the machine into position and engage the load. The machine should be square with the
load. Space the forks evenly between the pallet stringers.
4. Move the machine forward until the load contacts the carriage.
5. Lift the load carefully.
6. Slowly, move the machine in reverse until the load is clear enough to lower.
7. Carefully lower the load while you tilt the forks back to the travel position.
Travel with the load as low as possible while you still maintain ground clearance.
Travel with the load uphill on upgrades and on downgrades.
Copyright 1993 - 2012 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Jan 28 2012 03:59:42 GMT-0800 ( ( ))