
the STORED position on the material handling arm.
6. Remove all personnel from the work area.
7. Start the engine.
8. Disengage the parking brake.
9. Lower the load to the ground.
10. Stop the engine.
11. Wait as the second person removes the load from the hook.
12. Remove all personnel from the work area.
13. Start the engine.
14. Disengage the parking brake.
15. Slowly tilt back the material handling arm until the material handling arm is fully tilted back.
16. Back away from the load.
One Person Operation
Note: The material handling arm must be equipped with a center step in order to do the one person
operation.
Attaching the Load
1. Verify that the load does not exceed the weight limit. Refer to the Operation and Maintenance
Manual, "Material Handling Arm Rated Load" for the rated load capacities.
2. Keep all personnel out of the work area at all times, except when you are attaching or removing a
load.
3. Enter the machine. Start the engine.
4. Disengage the parking brake.