
46 RENR9716-02
Disassembly and Assembly Section
Installation Procedure (Type 1)
g01221659
Illustration 140
1. Position en
gine support (2) on the engine.
2. Install bolts (1).
End By:
a. Install the
vibration damper and the pulley. Refer
to Disassembly and Assembly, “Vibration Damper
and Pulley - Remove and Install”.
Remo val Procedure (Type 2)
Start By:
a. Remove the v
ibration damper and the pulley.
Refer to Disassembly and Assembly, “Vibration
Damper and Pulley - Remove and Install”.
1. Support the front of the engine.
g01221663
Illustration 141
2. Remove bolts (3).
3. Useasuitableliftingdevicetoremoveengine
support (4). The weight of engine support (4) is
approximately 35 kg (77 lb).
Installation Procedure (Type 2)
g01221663
Illustration 142
1. Useasuitab
le lifting device to position engine
support (4) on the engine. The weight of engine
support (4) is approximately 35 kg (77 lb).
2. Install bolts (3).
End By:
a. Install the vibration damper and the pulley. Refer
to Disassem
bly and Assembly, “Vibration Damper
and Pulley - Remove and Install”.
i02440962
Gear G r ou p (Rear) - Re move
SMCS Code: 1206-011; 1212-011
Removal Procedure
Table 32
Required Tools
Tool
Part
Number Part Description Qty
A
1P-0510
Driver Group 1
Start By:
a. Remove the flywheel housing. Refer to
Disassembly and Assembly, “Flywheel Housing
- Remove and Install”.