
81
WEBM1000 Operation Section (D6T LGP (OEM))
Machine Operation
Limp Home Mode (Implement)
112
Illustration 112
The “Implement Limp Home” menu option allows
slow incremental movement of the following
functions.
• Blade raise
• Blade tilt
• Blade angle (if equipped)
• Ripper raise (if equipped)
This movement is done without using the implement
contro
l levers. “Implement Limp Home” mode may
be selected by the operator or the technician in
order to move the implements to a safe position. This
exercise may be needed in order to move the
machine in the event of a major failure in one of the
machine systems. (An example is a failure such as
the bulldozer control lever.)
From the “Service” menu, use the appropriate arrow
bu
tton to
highlight the “Implement Limp Home”
option. Then press the “OK” button in order to
access the “Implement Limp Home” menu. This
menu will display a list of implements that may be
slowly moved by using the keys on the Monitoring
System Display.
To move an implement in this fashion, use the
a
pprop
riate arrow button to highlight the desired
implement function from the menu. Then press the
“OK” button in order to access that function. This
action will result in a screen that will display
instructions for moving the implement. Follow the
prompts on the screen and the directions in order to
move the implement.
Reference: Se
e Servic
e Manual, KENR5160,
“Features” for more information on the “Limp Home
Mode”.
Steering Limp Home Mode
113
Illustration 113
Menu display
If a failure occurs in the machine steering system, a
level III event will be activated and the brakes
applied.
1. St
op the machine and engage the parking brake.
114
Illustration 114
Note: Shutting down the machine safely is
recommended.
2. Snooze the display event screen.
115
Illustration 115