
58
Operation Section (D6T LGP (OEM)) WEBM1000
Machine Operation
The “Message Display” on the instrument module
with the hand control keypad will scroll through a set
of gears. The scrolling feature for gears will be
cyclical. The diagrams below show the scrolling
feature for gears for MVP Active status and MVP
Inactive status.
72
Illustration 72
Scrolling feature with an MVP active status
73
Illustration 73
Scrolling feature with MVP inactive status
Auto Kickdown Mode (14)
Auto Kickdown – This feature provides
the operator with an auto kickdown mode
of ope
ration. Once the feature has been
activated by the operator, the
transmission will automatically downshift to a lower
speed range when a significant load increase is
detected. Once the load on the machine has been
reduced, the operator can return to the desired
speed range by manually upshifting. The auto
kickdown will only downshift the transmission. The
feature will not automatically upshift the
transmission. The auto kickdown functions in
FORWARD and REVERSE speed range.
To activate the auto kickdown mode of operation,
pu
sh swit
ch (14) that is located on the right side of
the dashboard. An indicator light on the upper
display module will illuminate when the auto
kickdown is active. When the machine is started, the
transmission is in the previously selected mode. If
you start up the machine, and the auto kickdown is
not selected, push switch (17). If the auto kickdown
is active, the light is illuminated. In order to achieve
the best results, select the auto kickdown with the
transmission in NEUTRAL. If the autoshift function is
not desired, the machine can be operated in the
manual mode.
Autokickdown mode selection is done using the
setting
screen in the moni
toring system display
(message module).
The auto kickdown can be used in the following
mo
des:
Man
ual shift in Auto Kickdown Mode. Automati
c
auto kickdown mode allows the transmission to
downshift automatically. After a manual upshift, the
auto kickdown is prevented for 2 seconds. The
operator can make manual shifts at any time.
Auto Kickdown OFF.
Push swit
ch (14) and release
switch (14) until the auto kickdown indicator is off.
The manual shift mode is active if no autoshift
indicators are on.
Auto Kickdown LOW. This mode utilizes
the low
sh
ifting points.
Auto Kickdown MEDIUM. This mode utilizes the
middle shifting points.
Auto Ki
ckdown HIGH. This mode utilizes higher
downsh
ift points. The higher downshift points result
in a quicker response as load is applied.
Engine Start Switch (15)
74
Illustration 74