
78
Operation Section (D6T LGP (OEM)) WEBM1000
Machine Operation
Note: Bidirectional shift can be used to shift to Eco
Reverse 3rd reverse automatically.
Implement Settings
All the parameters in this category relate to the
operator preferences for the work tool operational
modes. The following parameters may be adjusted:
Blade Float – Ena
bled, disabled
Blade I
nstallation Status – Not installed, Single tilt,
Power Angle Tilt B
lade
Rear Attachment Installation Status (if equipped) –
Not installed, Single axis r
ippe
r, three-function
hydraulic
Display Settings
From the “Display Setup” menu, use the arrow
buttons to highlight the desired parameter. Then
press the “OK” button. This exercise will allow
access to that parameter screen. Then follow the
screen prompts in order to adjust the parameter. All
the parameters in this category relate to the operator
preferences in regard to the monitoring system
display. The following parameters may be adjusted:
Language – Se
lect a language.
Units – Sel
ect
one of the following options: Metric,
English an
d “Imperial”
Display Backlight – S
elect the amount of brightness
for th
e digital display window.
Contrast – Sele
ct the desired degree of contrast for
the digital display w
indow.
Machine Settings
From the “Machine Setting” menu, use the arrow
buttons to highlight the desired parameter. Then
press the “OK” button. This exercise will allow
access to that parameter screen. Then follow the
screen prompts in order to adjust the parameter.
Duration Timer (Lighting) – Se
lect the amount of
dura
tion time for the lights to remain on.