
182
Safety Section (Pipelayer Attachment Kit) WEBM1000
Safety Messages - 72H Pipelayer
Make sure that all of the safety messages are
legible. Clean the safety messages or replace the
safety messages if you cannot read the words.
Replace the illustrations if the illustrations are not
visible. When you clean the safety messages, use a
cloth, water, and soap. Do not use solvent, gasoline,
or other harsh chemicals to clean the safety
messages. Solvents, gasoline, or harsh chemicals
could loosen the adhesive that secures the safety
messages. Loose adhesive will allow the safety
message to fall. Do not use pressure washers to
clean the warning signs.
Replace any safety message that is damaged or
missing
. If a saf
ety message is attached to a part of
the machine that is replaced, install a safety
message on the replacement part.
Do Not Operate 1
Safety message (1) is located outside of the left
hand operator console arm rest.
Do not operate or work on this machine unless
you have read and understand the instructions
and warnings in the Operation and Maintenance
Manuals. Failure to follow the instructions or
heed the warnings could result in injury or death.
Contact your dealer for replacement manuals.
Proper care is your responsibility.