
174
Maintenance Section (D6T LGP (OEM)) WEBM1000
Transmission System Oil Sample - Obtain
255
Illustration 255
1. Remove the cover from the rear of the
transmission. The scavenge screen is located
behind the cover.
2. W
ash the screen in a clean, nonflammable
solvent.
3. Inspect th
e seal. If the seal is damaged, replace
the seal.
4. I
nstall the screen and the cover.
Transmission System Oil
Sample - Obtain
Hot oil and components can cause personal
injury.
Do not allow hot oil or components to contact
skin.
NOTICE
Care must be taken to ensure that fluids are
contai
ned during performance of inspection,
maintenance, testing, adjusting, and repair of the
product. Be prepared to collect the fluid with suitable
containers before opening any compartment or
disassembling any component containing fluids.
Refer to Special Publicat
ion, NENG250
0 “Dealer
Service Tool Catalog” for tools and supplies suitable
to collect and contain fluids on Cat products.
Dispose of all fluids according
to local regulations
and mandates.
Obtain the sample of the transmission oil as close as
possible to the recommended sampling interval. The
recommended sampling interval is every 500
service hours. In order to receive the full effect of
S·O·S oil analysis, establish a consistent trend of
data. In order to establish a pertinent history of
data, perform consistent oil samplings that are
evenly spaced.
If the machine is operated under high load and/or
und
er high temper
ature conditions, sample all
fluids at the 250 hour interval.
256
Illustration 256
The oil sampling valve for the power train is shown.
1. Open the access cover on the right side of the
cab in front of the hydraulic tank.
2. Remove the protective cap.
3. Use 8T-9190 Flu
id Sampling Bottle (1) to obtain a
sample.
4. After you take a sample, remove the cap with the
probe
from the bottle. Discard the cap with the
probe. Install the sealing cap that is provided
with 8T-9190 Fluid Sampling Bottle (1).
5. Re
place the protective cap.
6. Install the access cover.
Referen
ce: Refer to
, “Lubricant Viscosities” in the
Maintenance Section of this manual for the correct
fluid for your machine.
Window Washer Reservoir -
Fill
NOTICE
When operating in freezing temperatures, use
Caterpillar or any commerc
ially available nonfreezing
window washer solvent.