
16
Safety Section (D6T LGP (OEM)) WEBM1000
Additional Messages
8
Illustration 8
Refer to Operation and Maintenance Manual,
“Lubricant Viscosities”.
The engine must be shut off before any maintenance
is perfor
med. Use a wand in order to clean debris
from the fan and baffle assembly.
Product Link (5)
This message is located beneath the left window
in
side th
e cab.
9
Illustration 9
The Product Link System is a communication device
that transmits information regarding the machine
back to Caterpillar and Caterpillar dealers and
customers. All logged events and diagnostic codes
that are available to the Caterpillar Electronic
Technician (ET) on the CAT data link can be sent to
the receiving station. Information can also be sent to
the Product Link System. The information is used to
improve Caterpillar products and Caterpillar
services.
The Product Link is also available in cellular format.
Refer to Operation and Maintenance Manual,
“Pr
oduct
Link” for more information.
Reference: See Oper
ation and Maintenance
Manual, “Maintenance Interval Schedule” for all
maintenance recommendations.
Diesel Fuel Requirements (6)
One of the following messages is located next to the
fuel
filler cap.
10
Illustration 10
11
Illustration 11
Use only Ultralow Sulfur Diesel (ULSD) fuel.
Note: In Europe, diesel fuels that are identified as
meeting “
European Standard EN590:2004”
requirements for 10 ppm sulfur fuel (typically
referred to as “sulfur-free”) generally meet Cat
requirements for ULSD fuel.
Refer to Operation and Maintenance Manual,
“
Lubri
cant Viscosities” for more information.
FCC Compliance (7)
This message is located on the product link module
on th
e back right ROPS of the cab.