
200
Operation Section (Pipelayer Attachment Kit) WEBM1000
Before Operation
Pipelayer Operation
271
Illustration 271
Controls for pipelayer
Speed/Lockout Control Lever (1)
The speed/lockout control lever has three positions
that controls the speed range of the hook winch and
prevents accidental actuation of the pipelayer-
controls while not in use.
HIGH SPEED MODE—WINCH
CONTROLS UNLOCKED – Push the speed/lockout
contr
ol lever forward for the hook winch at high
speed range, the maximum hook winch pull is
reduced; the boom winch speed is unaffected.
LOCKED MODE—WINCH AND
CONTROLS LOCKED – To prevent accidental
act
uation of the hook and boom winch controls while
not in use, move the speed/lockout control lever to
the centre position and flip the speed/lockout control
lock to engage the lever (2) and lock it in position. In
this mode, the hook and boom winch controls do not
function. Always place the speed/lockout control
lever in the LOCKED MODE and engage the speed/
lockout control lock whenever the machine is left
unattended, or when inadvertent control operation
could result in a dangerous situation arising.