
Page 37
Cruise Control Parameters
High Cruise Control Speed Set Limit
OEM
Description:
High Cruise Control Speed Set Limit sets the maximum
vehicle speed for which cruise control may be used. If
the driver attempts to set a vehicle speed higher than
the programmed value of High Cruise Control Speed Set
Limit, the programmed value will become the cruise set
speed.
It is possible to program High Cruise Control Speed Set
above the programmed Vehicle Speed Limit. However,
the driver can only attain speeds higher than VSL by
using the ACCEL switch and “bumping” up the vehicle
speed.
Available:
All electronically controlled on-highway engines
covered in this handbook
Range:
Engine
Range
Cat
Default
Minimum Maximum
3126E, C7, C9 GM
30 MPH
(48 km/h)
75 MPH
(121 km/h)
75 MPH
(121 km/h)
3126E, C7, C9 Other
20 MPH
(32 km/h)
127 MPH
(204 km/h)
127 MPH
(204 km/h)
C-10, C-12, C-15,
C-16, C11, C13, C15
30 MPH
(48 km/h)
127 MPH
(204 km/h)
127 MPH
(204 km/h)
2007 C7, C9, C13,
C15
30 MPH
(48 km/h)
127 MPH
(204 km/h)
75 MPH
(121 km/h)
Advantages:
Using cruise control can reduce driver fatigue and
improve fuel economy. Fleets may want to set HCC
above VSL to encourage use of cruise control.
Disadvantages:
If High Cruise Control Speed Set is programmed to a
value above the Vehicle Speed Limit (VSL) the truck
most likely will be driven at higher speeds, therefore
reducing fuel economy.
Recommendations:
✔ Set the High Cruise Control Speed Set Limit at the
highest speed you intend the vehicle to cruise.
✔ Set the High Cruise Control Speed Set Limit 3 to 5
MPH (5 to 13 km/h) below the Vehicle Speed Limit
(VSL). This allows the driver to “run at hills” in
rolling terrain and allows some reserve speed for
passing.
✔ If increased security is needed, this parameter can
be “locked” using the Customer Parameter Lockout
( ).
See page 225