
TM 5-3805-261-10
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED 0013 00
0013 00-15
ENGINE
IDLING
44 After Overall View
Ensure machine is clean in order to facilitate performance of
PMCS inspections.
a. Check under machine for evidence
of fluid leakages such as oil, cool-
ant, fuel, or hydraulic fluid.
Class III fuel, oil, or hydraulic
fluid leaks are evident. Any
coolant leak is evident.
b. Check machine for obvious dam-
age that would impair operation.
Damage that would impair
operation is evident.
45 After Heater
Controls
(If equipped)
Check heater for damage and verify
correct operation.
Damaged or does not operate
if required for mission.
46 After Transmis-
sion/Differ-
ential Oil
Level
a. While the engine is at low idle,
check the transmission oil level.
Maintain level in the OPERATING
RANGE on the dipstick.
b. If oil level is low, add oil (Item 10,
11, 12, or 14, WP 0022 00) through
filler opening. Reinstall fill cap. DO
NOT overfill.
ITEM
NO. INTERVAL
MAN-
HOURS
LOCATION
ITEM TO
CHECK/
SERVICE PROCEDURE
NOT FULLY MISSION
CAPABLE IF:
TRANSMISSION
DIFFERENTIAL
FILL CAP
TRANSMISSION
DIFFERENTIAL
DIPSTICK
397-1050