
RENR9348-01 59
Troubleshooting Section
Troubleshooting:
Perform the following diagnostic procedure: “Injector
Solenoid Circuit - Test”
Results:
•
OK – STOP.
i02420876
CID 0009 FMI 06
Cylinder #9
Injector short
SMCS Code: 129
0-038
Conditions Which G enerate This Code:
The Electronic Control Module (ECM) is attempting to
operate the injector. The ECM detects a short circuit
in the circui
t for the injector.
System Response:
The ECM will log the diagnostic code. The ECM will
continue to attempt to operate the injector after the
code has been
logged.
Possible Performance Effect:
•
Engine misfires
•
Low power
Troubleshooting:
Perform the following diagnostic procedure: “Injector
Solenoid Circuit - Test”
Results:
•
OK – STOP.
i02420750
CID 0010 FMI
05 Cylinder #10
Injector open circuit
SMCS Code: 1
290-038
Conditions Which G enerate This Code:
The Electronic Control Module (ECM) is attempting
to operate the injector. T he ECM detects an open
circuit in t
he circuit for the injector.
System Response:
The ECM will log the diagnostic code. The ECM will
continue to attempt to operate the injector after the
code has be
en logged.
Possible Performance Effect:
•
Engine misfires
•
Low power
Tr oubleshooting:
Perform the following diagnostic procedure: “Injector
Solenoid Circuit - Test”
Results:
•
OK – STOP.
i02420920
CID 0010 F M I 06
Cylind er #10
Injecto r short
SMCS Code: 12
90-038
Conditions Which Generate This Code:
The Electronic Control Module (ECM) is attempting to
operate the injector. The ECM detects a short circuit
in the circui
t for the injector.
System Response:
The ECM will log the dia gnostic code. The ECM will
continue to attempt to operate the injector after the
code has been
logged.
Possible Performance Effect:
•
Engine misfires
•
Low power
Tr oubleshooting:
Perform the following diagnostic procedure: “Injector
Solenoid Circuit - Test”
Results:
•
OK – STOP.
i02420757
CID 0011 FMI
05 Cylinder #11
Injecto r open circuit
SMCS Code: 1
290-038
Conditions Which Generate This Code:
The Electronic Control Module (ECM) is attempting
to operate the injector. The ECM detects an open
circuit in t
he circuit for the injector.