
55
Excavator Supplement for 3066 Engine
Disassembly and Assembly Section
lustration 223
The radiator is removed for photographic purposes.
8. Install the washers and bolts (17) that secure
cover (18) to the engine front housing.
Illustration 226
12. Connect
the hose. Tighten hose clamp (11).
13. Connect
the hose. Tighten hose clamp (10).
14. Install bolt (8) in order to connect oil line (9).
Illustration 224
9. Install the washers and two nuts (14) on governor
linkages (13) and (15).
Illustration 225
Bottom view of the engine
10. Reposition the fuel fitting. Tighten banjo bolt
(12).
11. Connect
oil line (9) to the nipple (not shown).
Illustration 227
15. Connect hose assembly (6) to the fuel priming
pump.
16. Connect hose assembly (7) to the fuel priming
pump.
Illustration 228
17. Install access panel (4). Install the washers and
bolts (5).