
43
Excavator Supplement for 3066 Engine
Disassembly and Assembly Section
Illustration 173
2. Loosen exhaust clamp (16).
Illustration 174
3. Disconnect exhaust tube (17) from the
turbocharger housing.
4. Remove gasket (18).
Illustration 175 '
Note: There are two nuts (19) on each stud.
5. Remove nuts (19). Remove turbocharger housing
(20).
6. Remove the gasket (not shown) from the exhaust
manifold.
Turbocharger - Install
SMCSCode: 1052-012
Installation Procedure
Installation Procedure of the
Turbocharger Housing
Illustration 176
1. Install the gasket (not shown) on the exhaust
manifold.
2. Install turbocharger housing (20).
3. Apply 5P-3931 Anti-Seize Compound on the
threads of the mounting studs. Install two nuts
(19) on each stud. Tighten the nuts to a torque
of 54 ± 5 N-m (39.8 ± 3.7 lb ft).
Illustration 177
4. Install gasket (18).
5. Connect exhaust tube (17) to the turbocharger
housing.